Digital Photography Hacks [Electronic resources] نسخه متنی

Hack 8 A Flexible Arm to Hold Accessories

How many times have you wished for an extra
hand when you're shooting? Here's
one you can attach to your camera's hot shoe or
tripod socket.

When you're shooting without a tripod,
it's best to have both hands on the camera to keep
it steady and record sharp images. But sometimes you need to shade
the lens from the sun or hold a small item while you photograph it.
An extra hand would be invaluable at those times.

The folks at GranView Camera have invented a unique
accessory called the Flare Buster (http://www.multiclip.com) that might turn out
to be one of the most versatile tools in your camera bag. This
ingenious item is simply a flexible arm that's 15
inches long with a camera mount on one end and a sturdy clip on the
other. You can attach it to your camera via the tripod socket or the
hot shoe. Then, use the clip on the other end to hold whatever it is
you need held.

The Flare Buster kit comes with a card that can serve as a shade
against the sun, two vignettes that are handy for portraits because
they soften the edges of the frame around the subject, and a couple
of reflectors.

Now, the fun begins. If you need a simple lens shade, put the
supplied card in the clip and position it so that it protects the
front of your lens from the glare of the sun. The flexible arm moves
easily but stays firmly in position. For cameras that
don't accept filters, simply attach the filter to
the clip and position it in front of your lens. Who needs filter
screw threads when you have a Flare Buster?

Digital cameras have amazing close-up focusing ability. Usually, the
hardest part is correctly positioning the item
you're photographing. Why not attach the item to the
Flare Buster and position it any way you want, as illustrated in
Figure 1-8? You don't even need a
tripod; because the item is now connected to the camera, they move in
unison.

Figure 1-8. Flare Buster, holding an item for close-up photography

For a super-soft background when shooting close-ups with the Flare
Buster, try moving the camera from left to right during the exposure.
This is called
panning,
and you can get some evocative effects with it.

Or, for close-up subjects that are fine where they are, such as a
flower in the ground, attach one of the reflectors to the clip and
use the flexible arm to reflect a little
fill light to your close-up photography by
bouncing light back onto the subject.

Flare Buster kits range from US$30 to $36 depending on the
configuration. They are well made and fit easily in your camera bag.
You'll always have that extra hand available to make
photography just a little bit easier.