Professional Windows Server 1002003 Security A Technical Reference [Electronic resources] نسخه متنی

Install WINS

First, make sure that your
server
has a static IP address and that it points to itself as its preferred
WINS server. Then use Add or Remove Programs in the Control Panel to
install WINS.

Configure WINS Clients

You can configure WINS

clients
either manually or automatically using DHCP. To do this manually on
WS2003 computers:

Control Panel Network Connections right-click on Local Area Connection Properties Internet Protocol (TCP/IP) Properties Advanced WINS NetBIOS Setting Enable NetBIOS over TCP/IP Add specify IP addresses of primary and secondary WINS servers

To use DHCP instead, first configure DHCP scope options 044 and 046
on your DHCP server (see

DHCP earlier in this
chapter). Then verify that the client is configured to use this
option by:

Control Panel Network Connections right-click on Local Area Connection Properties Internet Protocol (TCP/IP) Properties Advanced WINS NetBIOS Setting Default

Configure WINS Replication

WINS console select a WINS server right-click on Replication Partners New Replication Partner specify the IP address of the replication partner

You can specify whether your

replication
partner is a push, pull, or push/pull partner using the Advanced tab
on the properties sheet for the replication partner.

Create a Static Mapping

WINS console select a WINS server right-click on Active Registrations New Static Mapping specify computer name and IP address of non-WINS client

If you make an error entering a

static mapping, delete it and recreate
it.

Configure a WINS Proxy

To configure a WS2003 to act
as
a WINS proxy, use

regedt32.exe to change
EnableProxy from 0 to 1 in the following registry key:

HKLM\System\CurrentControlSet\Services\NetBT\Parameters

You should have no more than two WINS proxies per subnet. Make sure
you also configure the WINS proxy computer as a WINS client.