لطفا منتظر باشید ...
Publisher6.2 Drive Types
As
distinct from diskette types and formats, six drive types have been
installed in PC-compatible systems:
5.25-inch 160/180 KB (SSDD)
Single-Sided,
Double-Density
(SSDD) was the standard FDD in very early
PC-class systems. These drives read and write only SSDD diskettes.
5.25-inch 320/360 KB (DSDD)
Double-Sided,
Double-Density
(DSDD) was the standard FDD in PC-class systems,
and was often found as a second FDD in early AT and 386 systems.
These drives read and write single-sided (160/180 KB) and
double-sided (320/360 KB) formats.
5.25-inch 1.2 MB (HD)
High-Density
(HD)this and all later formats are
double-sided, but that part is no longer statedis the standard
FDD in 286, 386, and some early 486 systems, and is often found as a
second FDD in early systems with 3.5-inch primary FDDs. These drives
read and write any 5.25-inch format. A diskette previously formatted
or written to by a 5.25-inch DD drive and then written to by a
5.25-inch HD drive may not subsequently be reliably readable in any
5.25-inch DD drive.
3.5-inch 720 KB (DD)
Double-Density
(DD) is an interim standard, commonly found as a primary
drive in early low-end 286 systems, and as a secondary drive in a few
PC-class systems and many 286, 386, and 486 systems. These drives
read and write only the 720 KB DD format.
3.5-inch 1.44 MB (HD)
High-Density (HD) is the
standard FDD on mainstream systems for the past decade. These drives
read, write, and format any 3.5-inch HD or DD diskette.
3.5-inch 2.88 MB (ED)
Extra-Density
(ED) is a
failed standard, introduced by IBM and now effectively obsolete. ED
diskettes are very expensivetypically $3 each versus $0.25 for
a 1.44 MB diskettewhich doomed the format. These drives are
difficult to find new nowadays, but can read, write, and format any
3.5-inch diskette in any format.
