Microsoft Windows Server 2003 Deployment Kit [Electronic resources] : Deploying Network Services نسخه متنی

List of Tables

Chapter 1: Designing a TCP/IP Network

Table 1.1: Supernetted Block of Addresses

Table 1.2: CIDR Routing Table Entry

Table 1.3: IPv6 Features Supported by Windows Server 2003 IPv6

Table 1.4: Server Applications Supported by Windows Server 2003 IPv6

Table 1.5: IPv4 and IPv6 Node Types

Table 1.6: Leading Zero Suppression and All-Zero Contiguous Block Compression

Table 1.7: Fields in a Unicast Global Address

Table 1.8: Examples of ISATAP addresses

Table 1.9: Fields in a Multicast Address

Table 1.10: Differences Between IPv4 Addressing and IPv6 Addressing

Chapter 2: Deploying DHCP

Table 2.1: Address Range and Clients per Subnet

Table 2.2: DHCP Address Pools per Subnet

Table 2.3: Example Address Reservations

Table 2.4: Scope Configurations on the DHCP Server at the Main Office

Table 2.5: Scope Configurations on the DHCP Server at the Branch Office

Table 2.6: Example DHCP Options

Chapter 3: Deploying DNS

Table 3.1: DNS Roles

Table 3.2: DNS Namespace Design Requirements

Table 3.3: Mixed Internal and External DNS Namespace Design Options

Table 3.4: Client Proxy Capabilities

Table 3.5: Feature Support in Different Implementations of DNS

Table 3.6: Internet DNS Domain Name Registration

Table 3.7: Character Set Restrictions

Table 3.8: Replication Options for Active Directory-Integrated Zone Data

Chapter 4: Deploying WINS

Table 4.1: NetBIOS Node Types

Chapter 5: Deploying ISA Server

Table 5.1: Determining the ISA Server Installation Mode

Table 5.2: Determining Which Clients to Deploy

Table 5.3: Hardware Requirements for Different Network Loads

Table 5.4: Hardware Requirements for Firewall

Table 5.5: Hardware Requirements for Forward Caching

Table 5.6: Hardware Requirements for Reverse Caching

Table 5.7: Comparing Features of ISA Server as a Stand-Alone Server or as an Array

Chapter 6: Deploying IPSec

Table 6.1: IPSec Security Solutions

Table 6.2: IPSec Transport Mode Uses

Table 6.3: IPSec Tunnel Mode Usage

Table 6.4: General IPSec Policy Settings

Table 6.5: Settings of IPSec Rules

Table 6.6: Equivalent Filters for NoDefaultExempt=0

Table 6.7: Choosing IPSec Protocol Types

Table 6.8: Choosing Authentication Methods

Chapter 7: Deploying IAS

Table 7.1: Comparison of Voluntary and Compulsory Tunneling

Table 7.2: Authentication Protocols That IAS Supports

Table 7.3: Selecting a Certificate Installation Method

Chapter 8: Deploying Dial-up and VPN Remote Access Servers

Table 8.1: Advantages and Constraints of the PPTP and L2TP/IPSec VPN Protocols

Table 8.2: Encryption Support Provided Under CHAP, MS-CHAP, and EAP-TLS

Table 8.3: Encryption Required at Each Encryption Level for PPTP and L2TP/IPSec Connections

Table 8.4: Certificate Infrastructures Required for Remote Access Client Authentication

Table 8.5: VPN Server Behind a Firewall: PPTP Filters on the Firewall''s Internet Interface

Table 8.6: VPN Server Behind a Firewall: PPTP Filters on the Perimeter Network Interface

Table 8.7: VPN Server Behind a Firewall: L2TP/IPSec Filters on the Firewall''s Internet Interface

Table 8.8: VPN Server Behind a Firewall: L2TP/IPSec Filters on the Firewall''s Perimeter Network Interface

Table 8.9: VPN Server in Front of a Firewall: Packet Filters for PPTP

Table 8.10: VPN Server in Front of a Firewall: Packet Filters for L2TP/IPSec

Chapter 10: Connecting Remote Sites

Table 10.1: Comparing a PPTP Solution with an L2TP/IPSec Solution

Table 10.2: Using PPTP and L2TP/IPSec for Different VPN Connections on the Same Network

Table 10.3: Comparing On-Demand and Persistent Connections

Table 10.4: Comparing One-Way and Two-Way Initiated Connections

Table 10.5: Requirements for Using a Third-Party CA

Table 10.6: Choosing a Data Encryption Method

Table 10.7: Encryption Strength by Connection Type

Table 10.8: Example Configuration of Demand-Dial Interfaces and User Accounts for a Two-Way Initiated VPN Connection

Table 10.9: Example Configuration for a Dial-up One-Way Initiated Connection

Table 10.10: New Features for Dial-up or VPN Site-to-Site Connections Since Windows NT Server 4.0 RRAS

Table 10.11: Capacity Planning

Table 10.12: Hardware and Software Requirements for a Demand-Dial Router

Table 10.13: Enabling the Routing and Remote Access Service

Table 10.14: Configuring the Demand-Dial Interface for a Remote Site Connection

Table 10.15: Configuring an Additional Demand-Dial Interface for a Temporary Link to the ISP

Table 10.16: Creating a Common Remote Access Policy by Using the New Remote Access Policy Wizard

Table 10.17: Creating a Custom Remote Access Policy by Using the New Remote Access Policy Wizard

Table 10.18: Configuring the Static Route Dialog Box for a Site-to-Site Connection

Table 10.19: Using the Configure Device Dialog Box to Configure Ports

Chapter 11: Deploying a Wireless LAN

Table 11.1: Example IP Address Allocation for IP Subnet 172.16.50.0/24

Table 11.2: Support for Autoenrollment of Certificates Provided in Windows

Table 11.3: Adding a Remote Access Policy for Wireless Users