Access Cookbook, 2nd Edition [Electronic resources]

Ken Getz; Paul Litwin; Andy Baron

نسخه متنی -صفحه : 232/ 39

Recipe 2.7 Size a Form's Controls to Match the Form's Size

2.7.1 Problem

Windows users have become accustomed to resizing forms on their screens. A professional-looking application will proportionally resize the controls on a form when you stretch or shrink that form. You'd like to be able to resize your forms while the application is running and have the controls on the form react appropriately. For example, the Database Explorer window's list box expands when you expand the window. How can you do this on your own forms?

2.7.2 Solution

Because Access can notify your application when the user resizes a form, you can attach code to the Resize form event and react to the change in size. Access also triggers this event when it first draws the form, so you can place your controls correctly then, too. Base your calculations on the form's InsideWidth and InsideHeight properties.

Load and run the form frmExpando in

02-07.MDB . Resize the form and watch the size of the large text box. Also notice the positions of the two command buttons. Figure 2-13 shows the form in design mode, and Figure 2-14 shows the form sized to different proportions. Though it's perfectly reasonable to change the size of all the controls, this form does not. It uses three different techniques:

Figure 2-13. frmExpando in design mode

Do nothing

The label above the text box doesn't change at all as you resize the form.

Change position only

The two command buttons move with the right edge of the form, but they don't change size.

Change size

The large text box changes its size to match the size of the form.

Figure 2-14. frmExpando at runtime, with different proportions

The code that does the work in this case is specific to the particular form. Follow the steps below to create a form similar to frmExpando. Once you've gone through these steps, you should be able to expand on the concepts (pun intended) and create your own self-sizing forms.

Create a new form and create controls and properties as shown in Table 2-5.

Table 2-5. Controls and their properties for frmExpando
Control type	Property	Value
Label	Name	lblSample
	Left	0.1 in
	Top	0.0833 in
	Width	1.7917 in
	Height	0.1667 in
	Caption	Enter some text
Text box	Name	txtEntry
	Left	0.1 in
	Top	0.3333 in
	Width	1.8 in
	Height	0.8333 in
Command button (OK)	Name	cmdOK
	Caption	&OK
	Left	2 in.
	Top	0.3333 in
	Width	0.6979 in
	Height	0.25 in
Command button (Cancel)	Name	cmdCancel
	Caption	&Cancel
	Left	2 in.
	Top	0.6667 in
	Width	0.6979 in
	Height	0.25 in

Place the following code in the form's Resize event procedure. You can copy this code from frmExpando's.

Private Sub Form_Resize( )
Dim intHeight As Integer
Dim intWidth As Integer
Dim ctl As Control
Static fInHere As Integer
Const acbcMinHeight = 2000
Const acbcMinWidth = 4000
' Optimize a bit. If you're already executing the code in here, 
' just get out. This can happen if you're in here because of an 
' auto-resize (if you try and size the form too small).
If fInHere Then GoTo ExitHere
fInHere = True
On Error GoTo HandleErr
' Get the current screen coordinates.
intHeight = Me.InsideHeight
intWidth = Me.InsideWidth
' Make sure the width and height aren't too small. If they are, 
' resize the form accordingly. This could force Access to call 
' this sub again, so use fInHere to avoid that extra overhead.
If intWidth < acbcMinWidth Then
DoCmd.MoveSize , , acbcMinWidth
intWidth = Me.InsideWidth
End If
If intHeight < acbcMinHeight Then
DoCmd.MoveSize , , , acbcMinHeight
intHeight = Me.InsideHeight
End If
' Set the detail section's height to be the same as the form's.
' Change this if you want to include header and footer sections.
Me.Section(0).Height = intHeight
' Align all the other controls, based on the left margin of the text box.
Set ctl = Me.txtEntry
With ctl
' Make the left and bottom margins equal.
.Height = intHeight - (.Left + .Top)
' The new width is the width of the form, minus the width of the 
' buttons, minus 3 times the gap (the left margin). Two gaps are 
' for the buttons, and one more is for the left margin itself.
.Width = intWidth - Me.cmdOK.Width - (3 * .Left)
End With
' Set the positions of the two buttons.
With Me.cmdOK
.Left = intWidth - .Width - ctl.Left
End With
With Me.cmdCancel
.Left = intWidth - .Width - ctl.Left
End With
ExitHere:
Exit Sub
HandleErr:
fInHere = False
Resume ExitHere
End Sub

2.7.3 Discussion

The code used in this solution reacts to the Resize events that occur when you resize a form in run mode (and when you open the form). The code retrieves the form's current size (its InsideWidth and InsideHeight properties) and resizes the controls accordingly.

This example starts out by checking a flag, fInHere, and causes the subroutine to exit if the variable's value is True. It's possible that the procedure itself might cause another Resize event (if you've sized the form smaller than the preset minimum size); this flag ensures that the routine doesn't do more work than it needs to do.

Using the Static Keyword

The fInHere flag was declared with the Static keyword. This keyword indicates that Access will maintain the value of the variable between calls to the function. You could accomplish the same effect by making fInHere global, but making the variable static makes it exist as long as the form is loaded, maintains its value from one call to another, and is local to the current procedure. The variable performs its task (as a sentry) without possible intervention from any other procedure.

The code next retrieves the current form size and stores the values into local variables. By placing these values into variables, Access eliminates the need to retrieve the values of the properties every time you need to use them. This speeds up the operation, because retrieving property values is expensive in terms of operating speed.

' Get the current screen coordinates.
intHeight = Me.InsideHeight
intWidth = Me.InsideWidth

Once it has retrieved the sizes, the procedure verifies that the form hasn't been sized too small by the user. If it has been, it forces the form to be at least as large as the preset values of acbcMinWidth and acbcMinHeight:

If intWidth < acbcMinWidth Then
DoCmd.MoveSize , , acbcMinWidth
intWidth = Me.InsideWidth
End If
If intHeight < acbcMinHeight Then
DoCmd.MoveSize , , , acbcMinHeight
intHeight = Me.InsideHeight
End If

Finally, the procedure sets the sizes and locations of each of the controls based on the new width and height of the form. First, it sets the height of the form's detail section, Section(0), so that there will be room for all of the controls at the new height. It then sets the width and height of the text box and sets the left coordinates of the command buttons. This preserves their sizes but resets their positions:

Set ctl = Me.txtEntry
With ctl
.Height = intHeight - (.Left + .Top)
.Width = intWidth - Me.cmdOK.Width - (3 * .Left)
End With
' Set the positions of the two buttons.
With Me.cmdOK
.Left = intWidth - .Width - ctl.Left
End With
With Me.cmdCancel
.Left = intWidth - .Width - ctl.Left
End With

The values used as offsets in this example were all arbitrarily chosen. They work for this particular example, but you'll need to vary them for your own forms. Remember, also, that this example was quite simple. You'll be doing many more calculations if you want to resize a multicolumn list box, for example. In any case, the concepts are the same: resize each of the controls based on the current size of the form. The tricky part is finding some "reference" on which you can base your sizing decisions; in this example, we used the offset of the expanding text box from the left edge of the form.