Hack 79 Automatic vtund.conf Generator
Generate a vtund.conf on the fly to match
changing network conditions.
If you've just come
from [Hack #78],
then the following script will generate a working
vtund.conf for the client side automatically.
If you haven't read the previous hack (or if
you've never used VTun), then go back and read it
before attempting to grok this bit of Perl. Essentially, it attempts
to take the guesswork out of changing the routing table around on the
client side by auto-detecting the default gateway and building the
vtund.conf accordingly.
To configure the script, take a look at the Configuration section.
The first line of $Config contains the addresses,
port, and secret that we used in the VTun hack.
The second line simply serves as an example of how to add more.
To run the script, either call it as vtundconf
home or set $TunnelName to the one you
want to default to. Better yet, make symlinks to the script, like
this:
# ln -s vtundconf home
# ln -s vtundconf tunnel2
Then you can generate the appropriate vtund.conf
by calling the symlink directly:
# vtundconf home > /usr/local/etc/vtund.conf
You might be wondering why anyone would go to all of the trouble to
make a vtund.conf-generating script in the first
place. Once you get the settings right, you'll never
have to change them, right?
Well, usually that is the case. But consider the case of a Linux
laptop that uses many different networks in the course of the day
(say, a DSL line at home, Ethernet at work, and maybe a wireless
connection at the local coffee shop). By running
vtundconf once at each location, you will have a
working configuration instantly, even if your IP and gateway is
assigned by DHCP. This makes it easy to get up and running quickly
with a live, routable IP address, regardless of the local network
topology.
Incidentally, VTun currently runs well on Linux,
FreeBSD, Mac OS X, Solaris, and others.
Save this file as vtundconf, and run it each
time you use a new wireless network to generate an appropriate
vtund.conf for you on the fly:
#!/usr/bin/perl -w
#
# vtund wrapper in need of a better name.
#
# (c)2002 Schuyler Erle & Rob Flickenger
#
################ CONFIGURATION
# If TunnelName is blank, the wrapper will look at @ARGV or $0.
#
# Config is TunnelName, LocalIP, RemoteIP, TunnelHost, TunnelPort, Secret
#
my $TunnelName = ";
my $Config = q{
home 208.201.239.33 208.201.239.32 208.201.239.5 5000 sHHH
tunnel2 10.0.1.100 10.0.1.1 192.168.1.4 6001 foobar
};
################ MAIN PROGRAM BEGINS HERE
use POSIX 'tmpnam';
use IO::File;
use File::Basename;
use strict;
# Where to find things...
#
$ENV{PATH} = "/bin:/usr/bin:/usr/local/bin:/sbin:/usr/sbin:/usr/local/[RETURN]sbin";
my $IP_Match = '((?:\d{1,3}\.){3}\d{1,3})'; # match xxx.xxx.xxx.xxx
my $Ifconfig = "ifconfig -a";
my $Netstat = "netstat -rn";
my $Vtund = "/bin/echo";
my $Debug = 1;
# Load the template from the data section.
#
my $template = join( ", );
# Open a temp file -- adapted from Perl Cookbook, 1st Ed., sec. 7.5.
#
my ( $file, $name ) = (", ");
$name = tmpnam( )
until $file = IO::File->new( $name, O_RDWR|O_CREAT|O_EXCL );
END { unlink( $name ) or warn "Can't remove temporary file $name!\n"; }
# If no TunnelName is specified, use the first thing on the command line,
# or if there isn't one, the basename of the script.
# This allows users to symlink different tunnel names to the same script.
#
$TunnelName ||= shift(@ARGV) || basename($0);
die "Can't determine tunnel config to use!\n" unless $TunnelName;
# Parse config.
#
my ($LocalIP, $RemoteIP, $TunnelHost, $TunnelPort, $Secret);
for (split(/\r*\n+/, $Config)) {
my ($conf, @vars) = grep( $_ ne ", split( /\s+/ ));
next if not $conf or $conf =~ /^\s*#/o; # skip blank lines, comments
if ($conf eq $TunnelName) {
($LocalIP, $RemoteIP, $TunnelHost, $TunnelPort, $Secret) = @vars;
last;
}
}
die "Can't determine configuration for TunnelName '$TunnelName'!\n"
unless $RemoteIP and $TunnelHost and $TunnelPort;
# Find the default gateway.
#
my ( $GatewayIP, $ExternalDevice );
for (qx{ $Netstat }) {
# In both Linux and BSD, the gateway is the next thing on the line,
# and the interface is the last.
#
if ( /^(?:0.0.0.0|default)\s+(\S+)\s+.*?(\S+)\s*$/o ) {
$GatewayIP = $1;
$ExternalDevice = $2;
last;
}
}
die "Can't determine default gateway!\n" unless $GatewayIP and $ExternalDevice;
# Figure out the LocalIP and LocalNetwork.
#
my ( $LocalNetwork );
my ( $iface, $addr, $up, $network, $mask ) = ";
sub compute_netmask {
($addr, $mask) = @_;
# We have to mask $addr with $mask because linux /sbin/route
# complains if the network address doesn't match the netmask.
#
my @ip = split( /\./, $addr );
my @mask = split( /\./, $mask );
$ip[$_] = ($ip[$_] + 0) & ($mask[$_] + 0) for (0..$#ip);
$addr = join(".", @ip);
return $addr;
}
for (qx{ $Ifconfig }) {
last unless defined $_;
# If we got a new device, stash the previous one (if any).
if ( /^([^\s:]+)/o ) {
if ( $iface eq $ExternalDevice and $network and $up ) {
$LocalNetwork = $network;
last;
}
$iface = $1;
$up = 0;
}
# Get the network mask for the current interface.
if ( /addr:$IP_Match.*?mask:$IP_Match/io ) {
# Linux style ifconfig.
compute_netmask($1, $2);
$network = "$addr netmask $mask";
} elsif ( /inet $IP_Match.*?mask 0x([a-f0-9]{8})/io ) {
# BSD style ifconfig.
($addr, $mask) = ($1, $2);
$mask = join(".", map( hex $_, $mask =~ /(..)/gs ));
compute_netmask($addr, $mask);
$network = "$addr/$mask";
}
# Ignore interfaces that are loopback devices or aren't up.
$iface = " if /\bLOOPBACK\b/o;
$up++ if /\bUP\b/o;
}
die "Can't determine local IP address!\n" unless $LocalIP and $LocalNetwork;
# Set OS dependent variables.
#
my ( $GW, $NET, $PTP );
if ( $^O eq "linux" ) {
$GW = "gw"; $PTP = "pointopoint"; $NET = "-net";
} else {
$GW = $PTP = $NET = ";
}
# Parse the config template.
#
$template =~ s/(\$\w+)/$1/gee;
# Write the temp file and execute vtund.
#
if ($Debug) {
print $template;
} else {
print $file $template;
close $file;
system("$Vtund $name");
}
_ _DATA_ _
options {
port $TunnelPort;
ifconfig /sbin/ifconfig;
route /sbin/route;
}
default {
compress no;
speed 0;
}
# 'mytunnel' should really be `basename $0` or some such
# for automagic config selection
$TunnelName {
type tun;
proto tcp;
keepalive yes;
pass $Secret;
up {
ifconfig "%% $LocalIP $PTP $RemoteIP arp";
route "add $TunnelHost $GW $GatewayIP";
route "delete default";
route "add default $GW $RemoteIP";
route "add $NET $LocalNetwork $GW $GatewayIP";
};
down {
ifconfig "%% down";
route "delete default";
route "delete $TunnelHost $GW $GatewayIP";
route "delete $NET $LocalNetwork";
route "add default $GW $GatewayIP";
};
}
Rob Flickenger (Linux Server Hacks)
|
لطفا منتظر باشید ...
