UNIX Network Programming Volume 1, Third Edition [Electronic resources] : The Sockets Networking API نسخه متنی

اینجــــا یک کتابخانه دیجیتالی است

با بیش از 100000 منبع الکترونیکی رایگان به زبان فارسی ، عربی و انگلیسی

UNIX Network Programming Volume 1, Third Edition [Electronic resources] : The Sockets Networking API - نسخه متنی

Addison Wesley

| نمايش فراداده ، افزودن یک نقد و بررسی
افزودن به کتابخانه شخصی
ارسال به دوستان
جستجو در متن کتاب
بیشتر
تنظیمات قلم

فونت

اندازه قلم

+ - پیش فرض

حالت نمایش

روز نیمروز شب
جستجو در لغت نامه
بیشتر
لیست موضوعات
توضیحات
افزودن یادداشت جدید










15.7 Passing Descriptors


When we think of passing an open descriptor from one process to another, we normally think of either

  • A child sharing all the open descriptors with the parent after a call to fork

  • All descriptors normally remaining open when exec is called


In the first example, the process opens a descriptor, calls fork, and then the parent closes the descriptor, letting the child handle the descriptor. This passes an open descriptor from the parent to the child. But, we would also like the ability for the child to open a descriptor and pass it back to the parent.

Current Unix systems provide a way to pass any open descriptor from one process to any other process. That is, there is no need for the processes to be related, such as a parent and its child. The technique requires us to first establish a Unix domain socket between the two processes and then use sendmsg to send a special message across the Unix domain socket. This message is handled specially by the kernel, passing the open descriptor from the sender to the receiver.

The black magic performed by the 4.4BSD kernel in passing an open descriptor across a Unix domain socket is described in detail in Chapter 18 of TCPv3.

SVR4 uses a different technique within the kernel to pass an open descriptor, the I_SENDFD and I_RECVFD ioctl commands, described in Section 15.5.1 of APUE. But, the process can still access this kernel feature using a Unix domain socket. In this text, we describe the use of Unix domain sockets to pass open descriptors, since this is the most portable programming technique: It works under both Berkeley-derived kernels and SVR4, whereas using the I_SENDFD and I_RECVFD ioctls works only under SVR4.

The 4.4BSD technique allows multiple descriptors to be passed with a single sendmsg, whereas the SVR4 technique passes only a single descriptor at a time. All our examples pass one descriptor at a time.


The steps involved in passing a descriptor between two processes are then as follows:


  1. Create a Unix domain socket, either a stream socket or a datagram socket.

    If the goal is to fork a child and have the child open the descriptor and pass the descriptor back to the parent, the parent can call socketpair to create a stream pipe that can be used to exchange the descriptor.

    If the processes are unrelated, the server must create a Unix domain stream socket and bind a pathname to it, allowing the client to connect to that socket. The client can then send a request to the server to open some descriptor and the server can pass back the descriptor across the Unix domain socket. Alternately, a Unix domain datagram socket can also be used between the client and server, but there is little advantage in doing this, and the possibility exists for a datagram to be discarded. We will use a stream socket between the client and server in an example presented later in this section.

  2. One process opens a descriptor by calling any of the Unix functions that returns a descriptor: open, pipe, mkfifo, socket, or accept, for example.

    Any type of descriptor can be passed from one process to another, which is why we call the technique "descriptor passing" and not "file descriptor passing."

  3. The sending process builds a msghdr structure (Section 14.5) containing the descriptor to be passed. POSIX specifies that the descriptor be sent as ancillary data (the msg_control member of the msghdr structure, Section 14.6), but older implementations use the msg_accrights member. The sending process calls sendmsg to send the descriptor across the Unix domain socket from Step 1. At this point, we say that the descriptor is "in flight." Even if the sending process closes the descriptor after calling sendmsg, but before the receiving process calls recvmsg (in the next step), the descriptor remains open for the receiving process. Sending a descriptor increments the descriptor's reference count by one.

  4. The receiving process calls recvmsg to receive the descriptor on the Unix domain socket from Step 1. It is normal for the descriptor number in the receiving process to differ from the descriptor number in the sending process. Passing a descriptor is not passing a descriptor number, but involves creating a new descriptor in the receiving process that refers to the same file table entry within the kernel as the descriptor that was sent by the sending process.


The client and server must have some application protocol so that the receiver of the descriptor knows when to expect it. If the receiver calls recvmsg without allocating room to receive the descriptor, and a descriptor was passed and is ready to be read, the descriptor that was being passed is closed (p. 518 of TCPv2). Also, the MSG_PEEK flag should be avoided with recvmsg if a descriptor is expected, as the result is unpredictable.


Descriptor Passing Example


We now provide an example of descriptor passing. We will write a program named mycat that takes a pathname as a command-line argument, opens the file, and copies it to standard output. But instead of calling the normal Unix open function, we call our own function named my_open. This function creates a stream pipe and calls fork and exec to initiate another program that opens the desired file. This program must then pass the open descriptor back to the parent across the stream pipe.

Figure 15.7 shows the first step: our mycat program after creating a stream pipe by calling socketpair. We designate the two descriptors returned by socketpair as [0] and [1].


Figure 15.7. mycat program after creating stream pipe using socketpair.


The process then calls fork and the child calls exec to execute the openfile program. The parent closes the [1] descriptor and the child closes the [0] descriptor. (There is no difference in either end of the stream pipe; the child could close [1] and the parent could close [0].) This gives us the arrangement shown in Figure 15.8.


Figure 15.8. mycat program after invoking openfile program.


The parent must pass three pieces of information to the openfile program: (i) the pathname of the file to open, (ii) the open mode (read-only, readwrite, or write-only), and (iii) the descriptor number corresponding to its end of the stream pipe (what we show as [1]). We choose to pass these three items as command-line arguments in the call to exec. An alternative method is to send these three items as data across the stream pipe. The openfile program sends back the open descriptor across the stream pipe and terminates. The exit status of the program tells the parent whether the file could be opened, and if not, what type of error occurred.

The advantage in executing another program to open the file is that the program could be a "set-user-ID" binary, which executes with root privileges, allowing it to open files that we normally do not have permission to open. This program could extend the concept of normal Unix permissions (user, group, and other) to any form of access checking it desires.

We begin with the mycat program, shown in Figure 15.9.

Figure 15.9 mycat program: copies a file to standard output.

unixdomain/mycat.c


1 #include "unp.h"
2 int my_open(const char *, int);
3 int
4 main(int argc, char **argv)
5 {
6 int fd, n;
7 char buff[BUFFSIZE];
8 if (argc != 2)
9 err_quit("usage: mycat <pathname>");
10 if ( (fd = my_open(argv[1], O_RDONLY)) < 0)
11 err_sys("cannot open %s", argv[1]);
12 while ( (n = Read(fd, buff, BUFFSIZE)) > 0)
13 Write(STDOUT_FILENO, buff, n);
14 exit(0);
15 }

If we replace the call to my_open with a call to open, this simple program just copies a file to standard output.

The function my_open, shown in Figure 15.10, is intended to look like the normal Unix open function to its caller. It takes two arguments, a pathname and an open mode (such as O_RDONLY to mean read-only), opens the file, and returns a descriptor.


Create stream pipe

8 socketpair creates a stream pipe. Two descriptors are returned: sockfd[0] and sockfd[1]. This is the state we show in Figure 15.7.


fork and exec

916 fork is called, and the child then closes one end of the stream pipe. The descriptor number of the other end of the stream pipe is formatted into the argsockfd array and the open mode is formatted into the argmode array. We call snprintf because the arguments to exec must be character strings. The openfile program is executed. The execl function should not return unless it encounters an error. On success, the main function of the openfile program starts executing.


Parent waits for child

1722 The parent closes the other end of the stream pipe and calls waitpid to wait for the child to terminate. The termination status of the child is returned in the variable status, and we first verify that the program terminated normally (i.e., it was not terminated by a signal). The WEXITSTATUS macro then converts the termination status into the exit status, whose value will be between 0 and 255. We will see shortly that if the openfile program encounters an error opening the requested file, it terminates with the corresponding errno value as its exit status.

Figure 15.10 my_open function: opens a file and returns a descriptor.

unixdomain/myopen.c


1 #include "unp.h"
2 int
3 my_open(const char *pathname, int mode)
4 {
5 int fd, sockfd[2], status;
6 pid_t childpid;
7 char c, argsockfd[10], argmode[10];
8 Socketpair(AF_LOCAL, SOCK_STREAM, 0, sockfd);
9 if ( (childpid = Fork()) == 0) { /* child process */
10 Close(sockfd[0]);
11 snprintf(argsockfd, sizeof(argsockfd), "%d", sockfd[1]);
12 snprintf(argmode, sizeof(argmode), "%d", mode);
13 execl("./openfile", "openfile", argsockfd, pathname, argmode,
14 (char *) NULL);
15 err_sys("execl error");
16 }
17 /* parent process - wait for the child to terminate */
18 Close(sockfd[1]); /* close the end we don't use */
19 Waitpid(childpid, &status, 0);
20 if (WIFEXITED(status) == 0)
21 err_quit("child did not terminate");
22 if ( (status = WEXITSTATUS(status)) == 0)
23 Read_fd(sockfd[0], &c, 1, &fd);
24 else {
25 errno = status; /* set errno value from child's status */
26 fd = -1;
27 }
28 Close(sockfd[0]);
29 return (fd);
30 }


Receive descriptor

23 Our function read_fd, shown next, receives the descriptor on the stream pipe. In addition to the descriptor, we read one byte of data, but do nothing with it.

When sending and receiving a descriptor across a stream pipe, we always send at least one byte of data, even if the receiver does nothing with the data. Otherwise, the receiver cannot tell whether a return value of 0 from read_fd means "no data (but possibly a descriptor)" or "end-of-file."


Figure D.2) defines the constant HAVE_MSGHDR_MSG_CONTROL if the msg_control version is supported.


Make certain msg_control is suitably aligned

1013 The msg_control buffer must be suitably aligned for a cmsghdr structure. Simply allocating a char array is inadequate. Here we declare a union of a cmsghdr structure with the character array, which guarantees that the array is suitably aligned. Another technique is to call malloc, but that would require freeing the memory before the function returns.

2745 recvmsg is called. If ancillary data is returned, the format is as shown in Figure 14.13. We verify that the length, level, and type are correct, then fetch the newly created descriptor and return it through the caller's recvfd pointer. CMSG_DATA returns the pointer to the cmsg_data member of the ancillary data object as an unsigned char pointer. We cast this to an int pointer and fetch the integer descriptor that is pointed to.

Figure 15.11 read_fd function: receives data and a descriptor.

lib/read_fd.c


1 #include "unp.h"
2 ssize_t
3 read_fd(int fd, void *ptr, size_t nbytes, int *recvfd)
4 {
5 struct msghdr msg;
6 struct iovec iov[1];
7 ssize_t n;
8 #ifdef HAVE_MSGHDR_MSG_CONTROL
9 union {
10 struct cmsghdr cm;
11 char control[CMSG_SPACE(sizeof (int))];
12 } control_un;
13 struct cmsghdr *cmptr;
14 msg.msg_control = control_un.control;
15 msg.msg_controllen = sizeof(control_un.control);
16 #else
17 int newfd;
18 msg.msg_accrights = (caddr_t) & newfd;
19 msg.msg_accrightslen = sizeof(int);
20 #endif
21 msg.msg_name = NULL;
22 msg.msg_namelen = 0;
23 iov[0].iov_base = ptr;
24 iov[0].iov_len = nbytes;
25 msg.msg_iov = iov;
26 msg.msg_iovlen = 1;
27 if ( (n = recvmsg(fd, &msg, 0)) <= 0)
28 return (n);
29 #ifdef HAVE_MSGHDR_MSG_CONTROL
30 if ( (cmptr = CMSG_FIRSTHDR(&msg)) != NULL &&
31 cmptr->cmsg_len == CMSG_LEN(sizeof(int))) {
32 if (cmptr->cmsg_level != SOL_SOCKET)
33 err_quit("control level != SOL_SOCKET");
34 if (cmptr->cmsg_type != SCM_RIGHTS)
35 err_quit("control type != SCM_RIGHTS");
36 *recvfd = *((int *) CMSG_DATA(cmptr));
37 } else
38 *recvfd = -1; /* descriptor was not passed */
39 #else
40 if (msg.msg_accrightslen == sizeof(int))
41 *recvfd = newfd;
42 else
43 *recvfd = -1; /* descriptor was not passed */
44 #endif
45 return (n);
46 }

If the older msg_accrights member is supported, the length should be the size of an integer and the newly created descriptor is returned through the caller's recvfd pointer.

Figure 15.12 shows the openfile program. It takes the three command-line arguments that must be passed and calls the normal open function.

Figure 15.12 openfile function: opens a file and passes back the descriptor.

unixdomain/openfile.c


1 #include "unp.h"
2 int
3 main(int argc, char **argv)
4 {
5 int fd;
6 if (argc != 4)
7 err_quit("openfile <sockfd#> <filename> <mode>");
8 if ( (fd = open(argv[2], atoi(argv[3]))) < 0)
9 exit((errno > 0) ? errno : 255);
10 if (write_fd(atoi(argv[1]), ", 1, fd) < 0)
11 exit((errno > 0) ? errno : 255);
12 exit(0);
13 }


Command-line arguments

712 Since two of the three command-line arguments were formatted into character strings by my_open, two are converted back into integers using atoi.


open the file

910 The file is opened by calling open. If an error is encountered, the errno value corresponding to the open error is returned as the exit status of the process.


Pass back descriptor

1112 The descriptor is passed back by write_fd, which we show next. This process then terminates. But, recall that earlier in the chapter, we said that it was acceptable for the sending process to close the descriptor that was passed (which happens when we call exit), because the kernel knows that the descriptor is in flight, and keeps it open for the receiving process.

The exit status must be between 0 and 255. The highest errno value is around 150. An alternate technique that doesn't require the errno values to be less than 256 would be to pass back an error indication as normal data in the call to sendmsg.


Figure 15.13 shows the final function, write_fd, which calls sendmsg to send a descriptor (and optional data, which we do not use) across a Unix domain socket.

Figure 15.13 write_fd function: passes a descriptor by calling sendmsg.

lib/write_fd.c


1 #include "unp.h"
2 ssize_t
3 write_fd(int fd, void *ptr, size_t nbytes, int sendfd)
4 {
5 struct msghdr msg;
6 struct iovec iov[1];
7 #ifdef HAVE_MSGHDR_MSG_CONTROL
8 union {
9 struct cmsghdr cm;
10 char control[CMSG_SPACE(sizeof(int))];
11 } control_un;
12 struct cmsghdr *cmptr;
13 msg.msg_control = control_un.control;
14 msg.msg_controllen = sizeof(control_un.control);
15 cmptr = CMSG_FIRSTHDR(&msg);
16 cmptr->cmsg_len = CMSG_LEN(sizeof(int));
17 cmptr->cmsg_level = SOL_SOCKET;
18 cmptr->cmsg_type = SCM_RIGHTS;
19 *((int *) CMSG_DATA(cmptr)) = sendfd;
20 #else
21 msg.msg_accrights = (caddr_t) & sendfd;
22 msg.msg_accrightslen = sizeof(int);
23 #endif
24 msg.msg_name = NULL;
25 msg.msg_namelen = 0;
26 iov[0].iov_base = ptr;
27 iov[0].iov_len = nbytes;
28 msg.msg_iov = iov;
29 msg.msg_iovlen = 1;
30 return (sendmsg(fd, &msg, 0));
31 }

As with read_fd, this function must deal with either ancillary data or older access rights. In either case, the msghdr structure is initialized and then sendmsg is called.

We will show an example of descriptor passing in Section 28.7 that involves unrelated processes. Additionally, we will show an example in Section 30.9 that involves related processes. We will use the read_fd and write_fd functions we just described.


/ 450