CCSP Cisco Secure PIX Firewall Advanced Exam Certification Guide, Second Edition [Electronic resources] نسخه متنی

"Do I Know This Already?" Quiz

The purpose of the "Do I Know This Already?" quiz is to help you decide if you really need to read the entire chapter. If you already intend to read the entire chapter, you do not necessarily need to answer these questions now.

The nine-question quiz, derived from the major sections in the "Foundation Topics" portion of the chapter, helps you determine how to spend your limited study time.

1.

Which command tests connectivity?

1. ping

2. nameif

3. ip address

4. write terminal

2.

Which command saves the configuration you made on the Cisco PIX Firewall?

1. write terminal

2. show start-running config

3. write memory

4. save config

3.

Which command assigns security levels to interfaces on the PIX Firewall?

1. ip address

2. route

3. nameif

4. secureif

4.

Which command flushes the ARP cache of the PIX Firewall?

1. flush arp cache

2. no arp cache

3. clear arp

4. You cannot flush the ARP cache.

5.

Which of following configures a message when a firewall administrator enters the enable command?

1. banner motd enter the enable password

2. banner enable enter the enable password

3. banner exec enter the enable password

4. banner login enter the enable password

6.

Why would you want authentication enabled between the PIX and the NTP server?

1. To ensure that the PIX does synchronize with an unauthorized NTP server

2. To maintain the integrity of the communication

3. To increase the speed of communication

4. To reduce latency

7.

How do you access the enable mode?

1. Enter the enable command and the enable password.

2. Enter the privilege command and the privilege password.

3. Enter the super-secret password.

4. Enter only the command privilege .

8.

How do you view the current configuration on your PIX Firewall?

1. show running-config

2. show current

3. write memory

4. save config

9.

In a DHCP client configuration, what is the command to release and renew the IP address on the outside interface?

1. ipconfig release

2. ip address dhcp outside

3. outside ip renew

4. ip address renew outside

The answers to the "Do I Know This Already?" quiz are found in Appendix A, "Answers to the ''''''''Do I Know This Already?'''''''' Quizzes and Q&A Sections." The suggested choices for your next step are as follows:

• Foundation Topics," "Foundation Summary," and "Q&A" sections.

• Foundation Summary" section and then go to the "Q&A" section. Otherwise, move to the next chapter.