CCSP Cisco Secure PIX Firewall Advanced Exam Certification Guide, Second Edition [Electronic resources] نسخه متنی

"Do I Know This Already?" Quiz

The purpose of the "Do I Know This Already?" quiz is to help you decide if you really need to read the entire chapter. If you already intend to read the entire chapter, you do not necessarily need to answer these questions now.

The ten-question quiz, derived from the major sections in the "Foundation and Supplemental Topics" portion of the chapter, helps you determine how to spend your limited study time.

1.

Which dynamic routing protocol(s) are supported by PIX Firewall Version 6.3?

1. RIP

2. OSPF

3. BGP

4. EIGRP

5. Answers a and b

2.

Which command do you use to configure static routes?

1. interface

2. mroute

3. route

4. static

5. None of the above

3.

Which command do you use to configure the PIX Firewall to statically receive a multicast session?

1. igmp forward

2. igmp static

3. multicast static

4. igmp join-group

5. None of the above

4.

What type of Ethernet VLAN tagging does the PIX Firewall support?

1. ISL

2. 802.1x

3. 802.1q

4. 802.3

5. None of the above

5.

IP multicasting is a technique that

1. consumes more network bandwidth by sending IP traffic to multiple hosts on the network.

2. enables the PIX Firewall to communicate with multiple hosts on the network.

3. sends traffic to specific Class C IP addresses.

4. sends traffic to specific Class D IP addresses, thus enabling multiple recipients to receive the same traffic stream.

5. None of the above

6.

Which of the following is true with respect to PIX Firewall RIP support?

1. RIP routing updates cannot be propagated by the PIX Firewall.

2. The PIX Firewall can advertise a default route.

3. Authentication is supported only for RIP version 2.

4. Answers a, b, and c

5. None of the above

7.

Which PIX Firewall command do you use to create logical interfaces?

1. interface

2. nameif

3. logical

4. static

5. None of the above

8.

Which PIX command enables you to configure the security level for logical interfaces?

1. static

2. interface

3. nameif

4. logical

5. None of the above

9.

Which OSPF subcommand defines which Type 3 LSA traffic to filter?

1. network

2. area

3. router ospf

4. prefix-list

5. access-list

10.

The PIX Firewall can propagate which types of routes?

1. BGP

2. OSPF

3. RIP

4. Static

5. None of the above

The answers to the "Do I Know This Already?" quiz are found in Appendix A, "Answers to the ''''Do I Know This Already?'''' Quizzes and Q&A Sections." The suggested choices for your next step are as follows:

• Foundation and Supplemental Topics," "Foundation Summary," and "Q&A" sections.

• Foundation Summary" section and then go to the "Q&A" section. Otherwise, move to the next chapter.