WINDOWS 1002000 PROFESSIONAL RESOURCE KIT [Electronic resources] نسخه متنی

DLC Protocol

Windows 2000 Professional includes a protected-mode, 32-bit, Data Link Control (DLC) protocol driver. You can use the DLC protocol to connect directly to an IBM host. However, you need third-party host emulation software to do so; DLC functions at the data-link layer of the Open Systems Interconnection (OSI) model. Because DLC functions at the data-link layer, it does not depend on other LAN protocols (for example, TCP/IP) for host connectivity; it is possible to have only the DLC protocol installed and bound to your network adapter.

To install the DLC Protocol

Open Network and Dial-Up Connections in Control Panel.

Right-click the local area connection for which you want to install the DLC protocol, and then click Properties.

On the General tab, click Install.

In the Select Network Component Type dialog box, click Protocol, and then click Add.

In the Select Network Protocol dialog box, click DLC Protocol, and then click OK.

In most cases, it is not necessary to change the default values for the DLC protocol. Generally, the only reason to change any of these parameters is if you are told to do so by the customer support department of the company from which you have obtained your third-party host emulation software. If you do have to change the default values, you might be able to change some of them by using the third-party host emulation software, for example by specifying a service access point (SAP). There are also some parameters that you can modify in the registry of Windows 2000 Professional, as Table 26.4 illustrates.

CAUTION

---

Do not use a registry editor to edit the registry directly unless you have no alternative. The registry editors bypass the standard safeguards provided by administrative tools. These safeguards prevent you from entering conflicting settings or settings that are likely to degrade performance or damage your system. Editing the registry directly can have serious, unexpected consequences that can prevent the system from starting and require that you reinstall Windows 2000. To configure or customize Windows 2000, use the programs in Microsoft Management Console (MMC) or Control Panel whenever possible.

To change any of these DLC parameters, go to the following path in a registry editor:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesDLCParameters

Table 26.4 DLC Registry Parameters