Adobe Premiere Pro 2.0 [Electronic resources] نسخه متنی

1.

Open Lesson 10-5 Finish and play that sequence to get an idea of what you can do. It's five PiPs, each with a drop shadow and beveled edge.

2.

Open the Lesson 10-4 Start sequence.

If you play this you will see only the clip on the top track. It covers all the clips below it in the sequence.

3.

Twirl down Effects > Presets > PiPs > 25% PiPs > 25% UL.

Note the following:

• All the PiP presets display clips at 1/16^th their normal area (reminder: 25% refers to clip perimeter, not area).

• LL, LR, UL and UR refer to screen locations: Lower Left, Lower Right, Upper Left and Upper Right.

• Each PiP set offers different types of PiP moves.

• Typically, you select a style and then adapt it to your needs. For example, you might change the start or end locations or the size.

4.

Drag PiP 25% UL Slide In Right from the 25% UL bin to the clip on the Video 3 track. Look at the Effect Controls timeline and play the sequence. It slides in from off the right edge of the screen and displays in the upper left corner of the screen.

5.

Drag PiP 25% LR Spin In from the 25% LR bin to the clip on the Video 2 track. Look at the Effect Controls timeline and play the sequence. It spins in from infinity and displays in the lower right corner of the screen.

6.

You can add the other three video clips to the sequence and apply PiP presets to them. The fourth and fifth clip will go on the Video 4 and Video 5 tracks. Drag the sixth clip above the Video 5 track and Premiere Pro will automatically add a new video track for that clip.